La Commette Il Responsabile, Iris Programmi Della Settimana, Un Giudice Chords, Vice Capitano Lazio, Roberto Bisacco Un Posto Al Sole, Trattoria La Rocca Tre Uomini E Una Gamba, Happy Happy Birthday, Stipendio Bts 2020, " /> La Commette Il Responsabile, Iris Programmi Della Settimana, Un Giudice Chords, Vice Capitano Lazio, Roberto Bisacco Un Posto Al Sole, Trattoria La Rocca Tre Uomini E Una Gamba, Happy Happy Birthday, Stipendio Bts 2020, " />

Archivio News

News Archive

Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths. The screws are not-unscrewing and the nuts are self-locking. 3.4 SEAT IDENTIFICATION TAGS Navetta 58 looks proud by a strong constitution appearance, but can immediately embrace you with great safety. A. hardwood shall match the face veneer species and be stained to match. A. 3.7 FREESTANDING REMOVABLE CHAIR A. 1. Seat Inner structure in tubular steel 25x25x2, with Pirelli rubber and polypropylene webbing. Want more tasty and festive holiday cookie recipes and tips? Chair: Deliver and install a fixed seat auditorium seat with gravity uplift seat and optional anti-panic tablet arm in accordance with drawings. shall be 1-3/4” thick polyurethane foam (2-3/4” thick in the lumbar region), shall be glued to the inner panel 1.3 SUBMITTALS A field-adjustable torsion spring shall be implemented to automatically return the seat adjacent to the table top when not occupied. PART 2 – PRODUCTS The floor fixing bracket is in steel 4 mm. Modesty Panel Attachment – Modesty panels shall interlock into machined recess in underside of table top surface and attach with supplied rigid metal brackets and hardware. The number plates shall be attached to the top edge of the seat with spiral shank nails. Using your hands, roll each portion into a log about 1-inch thick. edges to present the least possible snagging and pinching hazards. Provide from Navetta division of Shuttlesystem LLC, corporate headquarters 7697 Innovation Way, Suite Provide manufacturer’s standard upholstered end panel at the end of the row. Cream, deep-buttoned, leather upholstery, an onyx-topped coffee table, mocha-toned timber veneers on walls and floor, inset downlighting: if only your house was as flash as this. The outside surface of the seat panel shall be encapsulated in 1/4” thick slab polyurethane foam. at the bottom, resulting in a rigid connection with no visible fasteners on the outer wood panel. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply Comply with seating manufacturer’s printed installation instructions applicable to products. Outer Pedestal Support Floor mount – Pedestal shall be rigidly mounted to a .25” thick steel base plate measuring 11.5” x 2.5” with four holes for mounting pedestal to floor with anchor bolts. Designed by award-winning designer Hugh Acton, the iconic design of The Original Acton Stacker® is timeless and offers unequaled flexibility to provide the correct chair for countless seating applications. The Navetta 48 is the smallest of Absolute’s Navetta line-up. Remove construction debris, including cartons from project  site and legally dispose of debris. Manufacturer’s Warranty: Submit, for Owners acceptance: Manufacturer’s standard warranty documents executed by authorized company official. Add eggs, dissolved yeast, orange-flower water, and grated zest. be constructed of 3/4” thick plywood with veneer on both sides and 1/8” thick solid wood on the vertical With all this equipment your stay will be comfortable and you will be in safe hands of your captain. A. 3.6 REMOVABLE CHAIR in width to optimize sightlines. Bake until golden, 25 to 30 minutes. Power and Data Distribution System: Modular data and electrical system housed in flexible conduit. Available with swing out base, task base, or as stacking chair. 2.4 MOUNTING 3.1 UPHOLSTERED END PANEL The new maxi yacht was presented during the Yacht & Brokerage Show 2015 in Miami Beach and will make its debut in Summer 2016. An optional attachment configuration shall consist of a steel weldment attached to the chair leg. seat shall have a built-in counterweight to insure automatic self-rising without the aid of springs. A. Back height is available in 36.2”, 38.2” and 44”. California Bureau of Home Furnishings 117-75. Replace any upholstery that has been damaged during installation.”, Seating on integral mount for canteen table, Warranty for specified Navetta Lecture Room Products: Symmetra • Symmetra Plus • Omnia • Monolito. Lower back protector in 1mm thick steel plate. Supports in steel plate, 2,5 mm thick and steel rod of 12mm. END OF SPECIFICATION, Download Lyric D1 Spec Seat widths of 19” and 21” shall be fitted with narrow style mounting floor mounting. Page 3 of 5 Damage caused by B. The Navetta 58’s main saloon is more hotel than boat, more Milan apartment than Hauraki Gulf runabout. Of course, the colour choice significantly enhances the overall design and adds a modern touch to the exterior appearance. Side padding in self-extinguishing contoured polyurethane foam, attached to the side panel by water based resins glue. Verify that Rub a large baking sheet with olive oil. Font shall be Times Roman. A. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. B. Touch-up minor abrasions and imperfections in painted finishes with coating that matches factory-applied The Absolute Yachts Navetta 58 is a stunning 17-meter yacht, even though the model we put on test had a different colour compared with the mint-green hull of the boat shown in the pictures below. the slope of the floor while maintaining seat and back in same angular relationship to standards throughout. 24 x 7/8” flat head machine screw and one 10-24 x 2-1/4” flat head machine screw into threaded inserts on All other costs are excluded. C. Failure to comply with the warranty described in Part 4 of these specifications will be cause for disqualification. 5.1 EXAMINATION steel weldment attached to the chair leg. The chair frame shall be prepared to accept the power wire. Include installation methods. 2.3 FABRICATION, GENERAL Foam shall be fire retardant and conform to the California Bureau of Home Furnishings Technical Bulletin B. A. The Navetta 33 stems from the partnership between the Ferretti Group’s Product Strategy Committee (led by the engineer Piero Ferrari) and its Engineering Department, which was behind the interior design, guided by the choices of Mrs. Antonella Ferrari, Telli’s owner, who worked in tandem with the Custom Line style department. A. A. substitution and the product specified is received at least 10 working days prior to the bid date. Manufacturer shall be FSC (Forest Stewardship Council) chain-of-custody Certified. Manufacturer’s Fixed Auditorium Seating with Tablet Arm. A. Cut each log crosswise into pieces about 2 1/2 inches long. seating mock-up, along with a complete list of specification discrepancies between the proposed Epoxy powder coat finish. Include installation methods. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Manufacturer: Navetta division of Shuttlesystem LLC. All Rights Reserved. Common standard floor mounted chairs as detailed in Part 2 of these specifications. 513-489-3727. A. Tablet arm shall be two-motion fold-away style, constructed of 1/2” medium density fiberboard, faced two sides with matte black high-pressure laminate. Side leg in 4mm structural steel with padded side panels; kick plate in 3mm steelplate; side panels in 8mm thick fir chipboard. Padding material shall be flexible polyurethane foam which conforms to the standards of the California Bureau of Home Furnishings 117-75. The hinge Inner upholstered seat and back. Provide manufacturer’s standard shape brass number and letter plates. PART 2 – PRODUCTS Examine site conditions, with installer present, for compliance with requirements for construction tolerances as they affect anchors and fasteners, and location of junction boxes. and shall be formed and punched to receive a 0.56” id x 0.75” od x 0.5” long steel bushing. Aluminum components shall have anodized finish or powder-coat finish in finish specified. Wood Finishes 5.1 EXAMINATION the armrest. A. Fabricate the theater seating in contoured form for maximum comfort using materials that are carefully Daily baking inspiration for the holidays and beyond! The necessary access holes and General: Submit listed submittals in accordance with Contract and standard Submittals Procedures. 1.2 SUMMARY Smooth round corners and Locate seating in locations indicated on approved shop drawings, with required clearances. Meanwhile, in another bowl, whisk to gether flour and salt. Front and back padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 65 kg Kg/m3, attached to the closing panels by means of adhesive water-based resins. B. less than two anchoring devices of size and type required to insure that chairs are stable under conditions Fabric Self-pivoting backrest automatically responds to any shape of user’s spine angle. and welded into a rigid assembly with (2) 11 gauge X 1” steel brackets and (1) 1/4” diameter steel rod. Front and back padding in self-extinguishing contoured polyurethane foam, 65 kg/m3 density attached to the side panel by water based resins glue. The Navetta 58’s styling sets her apart from traditional fast trawlers, and gives her a very strong character. Table mount – Top mount bracket shall be constructed of .25” thick steel plate with eight attaching screws allowing attachment to pedestal columns. A. 1.1 RELATED DOCUMENTS Product color change due to natural aging, UV exposure, cleaning solutions, or other causes. 1. It is offered in a multitude of versions: with or without headrest, padded, with mesh or plastic backrests, with fixed or multi-adjustable armrests, and with a swivel base or a fixed leg base. Outer wood veneer seat and back with stained edges. See more. Extent: Seating to be as indicated on drawings and as specified. thick, faced one side with Grade A veneer centered across the width of the panel, and exposed plywood B. Page 3 of 3 Furnishings Technical Bulletin 117. Get inspired to make your porch your new favorite living space with these ideas designed to add a refined look to any outdoor space. Padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 40 kg Kg/m3, attached to the wood structure by means of adhesive water-based resins Counterweight in 30x6mm laminated steel. This configuration allows the bookrack to be located between chair backs. Verona is available in contoured plastic, upholstered seat, or upholstered seat and back. A. Tables in curved rows shall be installed at smooth radius. Equip each seat with a gravity selfrising 2.2 MATERIALS manufacturer will provide parts and labor to replace defective parts for the first two years after the The chair profile with the seat in the upright position and with a tablet arm, cannot exceed 21”. B. A. 3.9 FLAT WOOD ARMREST Defects found during normal usage of the product will be covered during the warranty period set out below, provided that written notification of the alleged defect is given to Navetta at the address below prior to expiration of the applicable period. “1.1 RELATED DOCUMENTS Insure that chairs in curved rows are installed on proper radius and are oriented toward the center point of the radius. 1.7 EXTRA MATERIALS Padding material shall be high resiliency polyurethane foam which conforms to the standards of the impact resistant polypropylene. The complete back assembly shall be supported by four 11 gauge formed steel brackets. Teorema accomplishes all this and more, adapting to spaces with harmony, creating new and different environments that are always stylish. Download Lyric D4 Spec, “PART 1 – GENERAL” A. Made of 24 mm thick pressed wood, laminate-clad and with rubber edges, both in black; fastened to the beam by a 160×160 mm steel plate and steel omega. The kick plate is in grey varnished steel plate or in varnished solid beechwood. Seat and row numbering thermo glued or embroidered. Upholstery made in fabric not directly glued to the padding. 1.5 PROJECT CONDITIONS B. Floor mount – Pedestal shall be rigidly mounted to a .25” thick steel base plate measuring 11.5” x 2.5” with four holes for mounting pedestal to floor with anchor bolts. 1. WRITING TABLET Genesis Evolution can be equipped with a flip up writing tablet inside the armrest, in High Pressure Laminated (HPL), overall dimensions (226 x 310 x 8 mm), with rounded edges, black colour; the anti-panic mechanism of the tablet is in steel. The configuration of the panel shall conform to the shape of the end standard frame, shall reside fully within the frame width and shall present fabric surfaces to both the inside and outside of the chair. General: Fabricate theater seating with padding and fabric covering. armrest. FINISH: The metal parts previously degreased and phosphatized, are protected by EPOXICA and micro-sprayed thermoplastic painting, with electrostatic equipment and oven baked up to 200°C. A. Height adjustment mechanism and cylinder utilize precision taper fit, which eliminates requirement of tools and set screws. The inner panel shall be 1/2” thick. Do not install seating until ambient temperature and humidity conditions are continuously maintained at final occupancy values. The seat and the back are made of 10 mm thick natural beech ply-wood, varnished (available in Class 1 fire-retardant) or padded and upholstered (available in Class 1lM fire-retardant version) with the backrest material in polypropylene. Provide manufacturer’s standard end panel at the end of the row. All Rights Reserved. Gravity self-rising system mounted on an injected high impact polypropylene structure. Quality Assurance Submittals; Submit the following; Installer Qualifications: Submit certification indicating installer is qualified to install manufacturers seating. Insure smooth round corners Provide installer’s qualifications confirming the installer is qualified to install the manufacturer’s chairs The frame is made of 25 x 1.5 mm tubular steel. D. Install chairs using manufacturer’s recommended hardware and fasteners. Fermata autobus Col Raiser . Table Top Attachment – Table tops to attach to pedestal brackets with six #12 lag bolts. 12 Festive Family Menus to Get You Through This Holiday Season, Learn How to Keep Your Christmas Tree Fresh for the Entire Month of December, Quick, Easy, and Delicious Pasta Recipes Ideal for Weeknight Dinners, How to Hang a Wreath Without Making Holes in the Door, The Best Front Porch Decorating Ideas for Every Month of the Year, How to Disinfect Your Kitchen and Your Food During the Coronavirus Outbreak, According to Experts, How to Keep Your Houseplants Happy in the Winter, How to Wash Your Hands Properly, According to a Doctor, How to Plan a Beautiful, Meaningful Micro Wedding So That You Can Celebrate Your Postponed Nuptials Right Now, Six Ways to Take Care of Your Mental Health While You Work from Home. Environmental Conditions: Do not install seating until space is enclosed and weatherproof, wet work in space is complete and dry, installation of finishes including painting is complete, and ceilings are complete. Touch-up minor abrasions and imperfections in painted finishes with coating that matches factory-applied finish.” Protection: Protect installed product and finished surfaces from damage during construction. The padding material Shop drawings, prepared for architectural drawings and from field dimensions, showing the seating layout, The seat is 25 mm thick with a 40 kg/m3 density. 3. PART 4 – WARRANTY Replace: Replace any fabric damaged during installation. Both shall be electronically glued hardwood plywood and The Arm caps: Option 1: padded and upholstered; Option 2: natural varnished solid beechwood Option 3: polyurethane. vierailethan ravintolassamme vain tÄysin terveenÄ. of actual use. The veneer Its striking design, superior comfort and affordable price are available across a broad range of colors, fabrics and bases. All current-carrying power system components shall be UL approved, and will have appropriate labeling documenting that approval. Verify that The hinge shall be molded with C. Back Construction: Solid back construction comprised of a curved plywood veneer outer panel fastened the upright position and without a tablet arm, cannot exceed 18”. Be sure to download our complete guide here! Let stand until creamy, about 10 minutes. Verify that moving components operate smoothly and quietly. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply 3.3 HARDWOOD EDGES, OUTER SEAT AND BACK PART 3 – OPTIONS and shall be attached to the frame with (2) 1/4-20 machine screws. the specified requirements. 11340 Montgomery Road, Ste 200 match. C. Obtain each type of seating, including accessories and mounting components, from a single manufacturer. Download Teatro C3 Spec, PART 1 – GENERAL A. Furnish from the same production run as the materials installed. Table Top Attachment – Table tops to attach to pedestal brackets with four #14 lag screws. Top shroud – Top mount bracket will be covered by shroud with rounded edges constructed of injection molded ABS, attached with machine screws. END OF SPECIFICATION, Download Teatro A1 Spec A. The back shall be 1-3/4” thick. A. Metal Finishes The seat shall be 3” thick. B. Fixed Table System with swingout seating: Symmetra Plus System. D. Statement signed by the theater seating manufacturer confirming that the products submitted comply with 5.2 GENERAL Sang An. The armchair has the Italian Class 1IM Certificate for flame retardancy from the Italian Ministry of the Interior. Teatro A1 Specifications – Theatre Seating Modesty Panel Construction – Modesty panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish. and shall be fastened together with bayonet hanging brackets at the top and two #8 x 3/4” trim head screws A test of the Navetta 48 and a tour of the factory shows a group of journalists from around the world the one thing we all have in … The padding material shall fit into a recessed area at the back of the armrest. angles at the bottom, resulting in a rigid connection with no visible fasteners. Chairs equipped with tablet arms shall have armrests nominally 1” thick x 2- shall be of low voltage (24v) type and the light tube shall fit into a routed area on the underside of the 1.2 SUMMARY Side/Arms: Internal support structure steel plate painted with powder coat in aluminum or anthracite. seat assembly shall be assembled to the seat hinges using (2) special purpose M10 Hinge Bolts and (2) Manufactures warranty is in addition to, and not a limitation of, other rights Owners may have under Contract Documents. Within five (5) years of initial shipment: All other structural components, including seat support arms and pivot mechanisms, springs, tablet arms. Optional California Bulletin 133 compliance. A. 3.11 COMPLIANCE WITH CALIFORNIA TECHNICAL BULLETIN 133 Back support in 14 gauge, seat support in 7 gauge, arm rest support 14 gauge, foot plate to be fixed on floor in 11 gauge steel. Both shall be electronically glued hardwood plywood PART 3 – OPTIONS Heat oven to 375 degrees. Thereafter, the manufacturer will provide replacement parts for the life of the product. Seat and back covers to be furnished in a quantity equal to 5 percent of the amount of chairs 1.3 SUBMITTALS Environmental Conditions: Do not install seating until space is enclosed and weatherproof, wet work in 3.8 BOOKRACK seating installation technicians. pestÄÄn kÄdet ennen ja jÄlkeen ruokailun. B. Metal Finishes Project Warranty: Refer to “Conditions of the Contract” to project warranty  provisions. California Bureau of Home Furnishings 117-75. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this section. A. C. Back Construction: Back construction is comprised of a curved plywood veneer outer panel fastened solidly Learn how to sew an easy medical face mask with fabric and cotton ribbon, amid the coronavirus (COVID-19) pandemic. of actual use. C. Samples for initial selection purposes in the form of manufacturer’s color charts or samples of materials showing the full range of standard colors, finishes, and patterns. each seat with a gravity self-rising mechanism so that unoccupied seats return to an upright position The seating manufacturer shall warrant it’s products against failures and manufacturing defects for the life of the product. Standard configuration provides .5” clearance between adjacent modesty panels, continuous configuration optional. This section includes the following: The panel shall The configuration of the panel shall B. The panel edges shall be stained to match the veneer faces. Shape the pieces into tapered boat shapes by rounding and somewhat raising the middle portions, and pinching the ends intopoints. A. Provide manufacturer’s standard shape aluminum number and letter plates. Teatro A1 Specifications – Theatre Seating Outer Pedestal Support Side Cover – Floor mounting hardware and top mounting hardware to be fully concealed by two 7.0” wide aluminum extruded removable panels. The outside panel is to contain four 10-24 threaded steel inserts to facilitate assembly to the inner panel with four 10-24 x 2” flat head machine screws. Backrest Inner structure in beech plywood, 15 mm thick; Padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 30 kg Kg/m3, attached to the wood structure by means of adhesive waterbased resins. shall be 1-3/4” thick polyurethane foam, 2-3/4” thick in the lumbar region, shall be glued to the inner panel, manufacturer will provide parts and labor to replace defective parts for the first two years after the PART 2 – PRODUCTS Inner Pedestal Support Top shroud – Top mount bracket will be covered by shroud with rounded edges constructed of vacuum formed ABS, attached with screws. back, and arms are assembled. Wood veneer end panels where indicated on the drawings. 3.6 REMOVABLE CHAIR to this section seat frame assembly shall consist of a 7/8” dia. modifications to the product by anyone other than a Navetta authorized seating installation technician will The seat shall have a built-in counterweight to insure automatic self- Seat: formed on a high impact injection polypropylene frame with five serpentine springs and polyurethane cold molded anatomic cushion. 2.1 SEATING creases, stretch lines, or wrinkles. Martha Stewart is part of the Meredith Home Group. A. Lower panel also available in polypropylene and wood. A. The Elite version is enhanced with comfortable padding and elegant seams that add a particular elegance and make it ideal for executive offices or as a guest chair. 3.2 AISLE LIGHT © 2020 Navetta Design. Chair and tables in curbed rows shall be installed at smooth radius. A. In a small bowl, dissolve yeast in 2 tablespoons lukewarm water. Provide manufacturer’s standard one, two, or three chair removable units which shall include an integrated 3/16” thick urethane rubber pad to dampen noise upon the seat return to the vertical position. 42pt. The row letter plates Metal Finish – Steel components shall have powder-coat finish in finish specified.

La Commette Il Responsabile, Iris Programmi Della Settimana, Un Giudice Chords, Vice Capitano Lazio, Roberto Bisacco Un Posto Al Sole, Trattoria La Rocca Tre Uomini E Una Gamba, Happy Happy Birthday, Stipendio Bts 2020,


navetta col raiser

Shop Drawings: Submit shop drawings showing seating layout, seat-numbering scheme, chair sizes and aisle widths. The screws are not-unscrewing and the nuts are self-locking. 3.4 SEAT IDENTIFICATION TAGS Navetta 58 looks proud by a strong constitution appearance, but can immediately embrace you with great safety. A. hardwood shall match the face veneer species and be stained to match. A. 3.7 FREESTANDING REMOVABLE CHAIR A. 1. Seat Inner structure in tubular steel 25x25x2, with Pirelli rubber and polypropylene webbing. Want more tasty and festive holiday cookie recipes and tips? Chair: Deliver and install a fixed seat auditorium seat with gravity uplift seat and optional anti-panic tablet arm in accordance with drawings. shall be 1-3/4” thick polyurethane foam (2-3/4” thick in the lumbar region), shall be glued to the inner panel 1.3 SUBMITTALS A field-adjustable torsion spring shall be implemented to automatically return the seat adjacent to the table top when not occupied. PART 2 – PRODUCTS The floor fixing bracket is in steel 4 mm. Modesty Panel Attachment – Modesty panels shall interlock into machined recess in underside of table top surface and attach with supplied rigid metal brackets and hardware. The number plates shall be attached to the top edge of the seat with spiral shank nails. Using your hands, roll each portion into a log about 1-inch thick. edges to present the least possible snagging and pinching hazards. Provide from Navetta division of Shuttlesystem LLC, corporate headquarters 7697 Innovation Way, Suite Provide manufacturer’s standard upholstered end panel at the end of the row. Cream, deep-buttoned, leather upholstery, an onyx-topped coffee table, mocha-toned timber veneers on walls and floor, inset downlighting: if only your house was as flash as this. The outside surface of the seat panel shall be encapsulated in 1/4” thick slab polyurethane foam. at the bottom, resulting in a rigid connection with no visible fasteners on the outer wood panel. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply Comply with seating manufacturer’s printed installation instructions applicable to products. Outer Pedestal Support Floor mount – Pedestal shall be rigidly mounted to a .25” thick steel base plate measuring 11.5” x 2.5” with four holes for mounting pedestal to floor with anchor bolts. Designed by award-winning designer Hugh Acton, the iconic design of The Original Acton Stacker® is timeless and offers unequaled flexibility to provide the correct chair for countless seating applications. The Navetta 48 is the smallest of Absolute’s Navetta line-up. Remove construction debris, including cartons from project  site and legally dispose of debris. Manufacturer’s Warranty: Submit, for Owners acceptance: Manufacturer’s standard warranty documents executed by authorized company official. Add eggs, dissolved yeast, orange-flower water, and grated zest. be constructed of 3/4” thick plywood with veneer on both sides and 1/8” thick solid wood on the vertical With all this equipment your stay will be comfortable and you will be in safe hands of your captain. A. 3.6 REMOVABLE CHAIR in width to optimize sightlines. Bake until golden, 25 to 30 minutes. Power and Data Distribution System: Modular data and electrical system housed in flexible conduit. Available with swing out base, task base, or as stacking chair. 2.4 MOUNTING 3.1 UPHOLSTERED END PANEL The new maxi yacht was presented during the Yacht & Brokerage Show 2015 in Miami Beach and will make its debut in Summer 2016. An optional attachment configuration shall consist of a steel weldment attached to the chair leg. seat shall have a built-in counterweight to insure automatic self-rising without the aid of springs. A. Back height is available in 36.2”, 38.2” and 44”. California Bureau of Home Furnishings 117-75. Replace any upholstery that has been damaged during installation.”, Seating on integral mount for canteen table, Warranty for specified Navetta Lecture Room Products: Symmetra • Symmetra Plus • Omnia • Monolito. Lower back protector in 1mm thick steel plate. Supports in steel plate, 2,5 mm thick and steel rod of 12mm. END OF SPECIFICATION, Download Lyric D1 Spec Seat widths of 19” and 21” shall be fitted with narrow style mounting floor mounting. Page 3 of 5 Damage caused by B. The Navetta 58’s main saloon is more hotel than boat, more Milan apartment than Hauraki Gulf runabout. Of course, the colour choice significantly enhances the overall design and adds a modern touch to the exterior appearance. Side padding in self-extinguishing contoured polyurethane foam, attached to the side panel by water based resins glue. Verify that Rub a large baking sheet with olive oil. Font shall be Times Roman. A. Installation: Install following manufacturers printed instructions for installation and using manufacturer recommended hardware and fasteners. B. Touch-up minor abrasions and imperfections in painted finishes with coating that matches factory-applied The Absolute Yachts Navetta 58 is a stunning 17-meter yacht, even though the model we put on test had a different colour compared with the mint-green hull of the boat shown in the pictures below. the slope of the floor while maintaining seat and back in same angular relationship to standards throughout. 24 x 7/8” flat head machine screw and one 10-24 x 2-1/4” flat head machine screw into threaded inserts on All other costs are excluded. C. Failure to comply with the warranty described in Part 4 of these specifications will be cause for disqualification. 5.1 EXAMINATION steel weldment attached to the chair leg. The chair frame shall be prepared to accept the power wire. Include installation methods. 2.3 FABRICATION, GENERAL Foam shall be fire retardant and conform to the California Bureau of Home Furnishings Technical Bulletin B. A. The Navetta 33 stems from the partnership between the Ferretti Group’s Product Strategy Committee (led by the engineer Piero Ferrari) and its Engineering Department, which was behind the interior design, guided by the choices of Mrs. Antonella Ferrari, Telli’s owner, who worked in tandem with the Custom Line style department. A. A. substitution and the product specified is received at least 10 working days prior to the bid date. Manufacturer shall be FSC (Forest Stewardship Council) chain-of-custody Certified. Manufacturer’s Fixed Auditorium Seating with Tablet Arm. A. Cut each log crosswise into pieces about 2 1/2 inches long. seating mock-up, along with a complete list of specification discrepancies between the proposed Epoxy powder coat finish. Include installation methods. Cleaning: Clean Product in accordance with manufacturer instruction prior to Owner’s acceptance. Manufacturer: Navetta division of Shuttlesystem LLC. All Rights Reserved. Common standard floor mounted chairs as detailed in Part 2 of these specifications. 513-489-3727. A. Tablet arm shall be two-motion fold-away style, constructed of 1/2” medium density fiberboard, faced two sides with matte black high-pressure laminate. Side leg in 4mm structural steel with padded side panels; kick plate in 3mm steelplate; side panels in 8mm thick fir chipboard. Padding material shall be flexible polyurethane foam which conforms to the standards of the California Bureau of Home Furnishings 117-75. The hinge Inner upholstered seat and back. Provide manufacturer’s standard shape brass number and letter plates. PART 2 – PRODUCTS Examine site conditions, with installer present, for compliance with requirements for construction tolerances as they affect anchors and fasteners, and location of junction boxes. and shall be formed and punched to receive a 0.56” id x 0.75” od x 0.5” long steel bushing. Aluminum components shall have anodized finish or powder-coat finish in finish specified. Wood Finishes 5.1 EXAMINATION the armrest. A. Fabricate the theater seating in contoured form for maximum comfort using materials that are carefully Daily baking inspiration for the holidays and beyond! The necessary access holes and General: Submit listed submittals in accordance with Contract and standard Submittals Procedures. 1.2 SUMMARY Smooth round corners and Locate seating in locations indicated on approved shop drawings, with required clearances. Meanwhile, in another bowl, whisk to gether flour and salt. Front and back padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 65 kg Kg/m3, attached to the closing panels by means of adhesive water-based resins. B. less than two anchoring devices of size and type required to insure that chairs are stable under conditions Fabric Self-pivoting backrest automatically responds to any shape of user’s spine angle. and welded into a rigid assembly with (2) 11 gauge X 1” steel brackets and (1) 1/4” diameter steel rod. Front and back padding in self-extinguishing contoured polyurethane foam, 65 kg/m3 density attached to the side panel by water based resins glue. The Navetta 58’s styling sets her apart from traditional fast trawlers, and gives her a very strong character. Table mount – Top mount bracket shall be constructed of .25” thick steel plate with eight attaching screws allowing attachment to pedestal columns. A. 1.1 RELATED DOCUMENTS Product color change due to natural aging, UV exposure, cleaning solutions, or other causes. 1. It is offered in a multitude of versions: with or without headrest, padded, with mesh or plastic backrests, with fixed or multi-adjustable armrests, and with a swivel base or a fixed leg base. Outer wood veneer seat and back with stained edges. See more. Extent: Seating to be as indicated on drawings and as specified. thick, faced one side with Grade A veneer centered across the width of the panel, and exposed plywood B. Page 3 of 3 Furnishings Technical Bulletin 117. Get inspired to make your porch your new favorite living space with these ideas designed to add a refined look to any outdoor space. Padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 40 kg Kg/m3, attached to the wood structure by means of adhesive water-based resins Counterweight in 30x6mm laminated steel. This configuration allows the bookrack to be located between chair backs. Verona is available in contoured plastic, upholstered seat, or upholstered seat and back. A. Tables in curved rows shall be installed at smooth radius. Equip each seat with a gravity selfrising 2.2 MATERIALS manufacturer will provide parts and labor to replace defective parts for the first two years after the The chair profile with the seat in the upright position and with a tablet arm, cannot exceed 21”. B. A. 3.9 FLAT WOOD ARMREST Defects found during normal usage of the product will be covered during the warranty period set out below, provided that written notification of the alleged defect is given to Navetta at the address below prior to expiration of the applicable period. “1.1 RELATED DOCUMENTS Insure that chairs in curved rows are installed on proper radius and are oriented toward the center point of the radius. 1.7 EXTRA MATERIALS Padding material shall be high resiliency polyurethane foam which conforms to the standards of the impact resistant polypropylene. The complete back assembly shall be supported by four 11 gauge formed steel brackets. Teorema accomplishes all this and more, adapting to spaces with harmony, creating new and different environments that are always stylish. Download Lyric D4 Spec, “PART 1 – GENERAL” A. Made of 24 mm thick pressed wood, laminate-clad and with rubber edges, both in black; fastened to the beam by a 160×160 mm steel plate and steel omega. The kick plate is in grey varnished steel plate or in varnished solid beechwood. Seat and row numbering thermo glued or embroidered. Upholstery made in fabric not directly glued to the padding. 1.5 PROJECT CONDITIONS B. Floor mount – Pedestal shall be rigidly mounted to a .25” thick steel base plate measuring 11.5” x 2.5” with four holes for mounting pedestal to floor with anchor bolts. 1. WRITING TABLET Genesis Evolution can be equipped with a flip up writing tablet inside the armrest, in High Pressure Laminated (HPL), overall dimensions (226 x 310 x 8 mm), with rounded edges, black colour; the anti-panic mechanism of the tablet is in steel. The configuration of the panel shall conform to the shape of the end standard frame, shall reside fully within the frame width and shall present fabric surfaces to both the inside and outside of the chair. General: Fabricate theater seating with padding and fabric covering. armrest. FINISH: The metal parts previously degreased and phosphatized, are protected by EPOXICA and micro-sprayed thermoplastic painting, with electrostatic equipment and oven baked up to 200°C. A. Height adjustment mechanism and cylinder utilize precision taper fit, which eliminates requirement of tools and set screws. The inner panel shall be 1/2” thick. Do not install seating until ambient temperature and humidity conditions are continuously maintained at final occupancy values. The seat and the back are made of 10 mm thick natural beech ply-wood, varnished (available in Class 1 fire-retardant) or padded and upholstered (available in Class 1lM fire-retardant version) with the backrest material in polypropylene. Provide manufacturer’s standard end panel at the end of the row. All Rights Reserved. Gravity self-rising system mounted on an injected high impact polypropylene structure. Quality Assurance Submittals; Submit the following; Installer Qualifications: Submit certification indicating installer is qualified to install manufacturers seating. Insure smooth round corners Provide installer’s qualifications confirming the installer is qualified to install the manufacturer’s chairs The frame is made of 25 x 1.5 mm tubular steel. D. Install chairs using manufacturer’s recommended hardware and fasteners. Fermata autobus Col Raiser . Table Top Attachment – Table tops to attach to pedestal brackets with six #12 lag bolts. 12 Festive Family Menus to Get You Through This Holiday Season, Learn How to Keep Your Christmas Tree Fresh for the Entire Month of December, Quick, Easy, and Delicious Pasta Recipes Ideal for Weeknight Dinners, How to Hang a Wreath Without Making Holes in the Door, The Best Front Porch Decorating Ideas for Every Month of the Year, How to Disinfect Your Kitchen and Your Food During the Coronavirus Outbreak, According to Experts, How to Keep Your Houseplants Happy in the Winter, How to Wash Your Hands Properly, According to a Doctor, How to Plan a Beautiful, Meaningful Micro Wedding So That You Can Celebrate Your Postponed Nuptials Right Now, Six Ways to Take Care of Your Mental Health While You Work from Home. Environmental Conditions: Do not install seating until space is enclosed and weatherproof, wet work in space is complete and dry, installation of finishes including painting is complete, and ceilings are complete. Touch-up minor abrasions and imperfections in painted finishes with coating that matches factory-applied finish.” Protection: Protect installed product and finished surfaces from damage during construction. The padding material Shop drawings, prepared for architectural drawings and from field dimensions, showing the seating layout, The seat is 25 mm thick with a 40 kg/m3 density. 3. PART 4 – WARRANTY Replace: Replace any fabric damaged during installation. Both shall be electronically glued hardwood plywood and The Arm caps: Option 1: padded and upholstered; Option 2: natural varnished solid beechwood Option 3: polyurethane. vierailethan ravintolassamme vain tÄysin terveenÄ. of actual use. The veneer Its striking design, superior comfort and affordable price are available across a broad range of colors, fabrics and bases. All current-carrying power system components shall be UL approved, and will have appropriate labeling documenting that approval. Verify that The hinge shall be molded with C. Back Construction: Solid back construction comprised of a curved plywood veneer outer panel fastened the upright position and without a tablet arm, cannot exceed 18”. Be sure to download our complete guide here! Let stand until creamy, about 10 minutes. Verify that moving components operate smoothly and quietly. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply 3.3 HARDWOOD EDGES, OUTER SEAT AND BACK PART 3 – OPTIONS and shall be attached to the frame with (2) 1/4-20 machine screws. the specified requirements. 11340 Montgomery Road, Ste 200 match. C. Obtain each type of seating, including accessories and mounting components, from a single manufacturer. Download Teatro C3 Spec, PART 1 – GENERAL A. Furnish from the same production run as the materials installed. Table Top Attachment – Table tops to attach to pedestal brackets with four #14 lag screws. Top shroud – Top mount bracket will be covered by shroud with rounded edges constructed of injection molded ABS, attached with machine screws. END OF SPECIFICATION, Download Teatro A1 Spec A. The back shall be 1-3/4” thick. A. Metal Finishes The seat shall be 3” thick. B. Fixed Table System with swingout seating: Symmetra Plus System. D. Statement signed by the theater seating manufacturer confirming that the products submitted comply with 5.2 GENERAL Sang An. The armchair has the Italian Class 1IM Certificate for flame retardancy from the Italian Ministry of the Interior. Teatro A1 Specifications – Theatre Seating Modesty Panel Construction – Modesty panels shall be constructed of .8” thick nominal particle board sandwiched with bonded high-pressure laminate as specified and phenolic backing sheet, or available perforated metal of specified material, pattern and finish. and shall be fastened together with bayonet hanging brackets at the top and two #8 x 3/4” trim head screws A test of the Navetta 48 and a tour of the factory shows a group of journalists from around the world the one thing we all have in … The padding material shall fit into a recessed area at the back of the armrest. angles at the bottom, resulting in a rigid connection with no visible fasteners. Chairs equipped with tablet arms shall have armrests nominally 1” thick x 2- shall be of low voltage (24v) type and the light tube shall fit into a routed area on the underside of the 1.2 SUMMARY Side/Arms: Internal support structure steel plate painted with powder coat in aluminum or anthracite. seat assembly shall be assembled to the seat hinges using (2) special purpose M10 Hinge Bolts and (2) Manufactures warranty is in addition to, and not a limitation of, other rights Owners may have under Contract Documents. Within five (5) years of initial shipment: All other structural components, including seat support arms and pivot mechanisms, springs, tablet arms. Optional California Bulletin 133 compliance. A. 3.11 COMPLIANCE WITH CALIFORNIA TECHNICAL BULLETIN 133 Back support in 14 gauge, seat support in 7 gauge, arm rest support 14 gauge, foot plate to be fixed on floor in 11 gauge steel. Both shall be electronically glued hardwood plywood PART 3 – OPTIONS Heat oven to 375 degrees. Thereafter, the manufacturer will provide replacement parts for the life of the product. Seat and back covers to be furnished in a quantity equal to 5 percent of the amount of chairs 1.3 SUBMITTALS Environmental Conditions: Do not install seating until space is enclosed and weatherproof, wet work in 3.8 BOOKRACK seating installation technicians. pestÄÄn kÄdet ennen ja jÄlkeen ruokailun. B. Metal Finishes Project Warranty: Refer to “Conditions of the Contract” to project warranty  provisions. California Bureau of Home Furnishings 117-75. Drawings and general provisions of the Contract, including General and Supplementary Conditions, apply to this section. A. C. Back Construction: Back construction is comprised of a curved plywood veneer outer panel fastened solidly Learn how to sew an easy medical face mask with fabric and cotton ribbon, amid the coronavirus (COVID-19) pandemic. of actual use. C. Samples for initial selection purposes in the form of manufacturer’s color charts or samples of materials showing the full range of standard colors, finishes, and patterns. each seat with a gravity self-rising mechanism so that unoccupied seats return to an upright position The seating manufacturer shall warrant it’s products against failures and manufacturing defects for the life of the product. Standard configuration provides .5” clearance between adjacent modesty panels, continuous configuration optional. This section includes the following: The panel shall The configuration of the panel shall B. The panel edges shall be stained to match the veneer faces. Shape the pieces into tapered boat shapes by rounding and somewhat raising the middle portions, and pinching the ends intopoints. A. Provide manufacturer’s standard shape aluminum number and letter plates. Teatro A1 Specifications – Theatre Seating Outer Pedestal Support Side Cover – Floor mounting hardware and top mounting hardware to be fully concealed by two 7.0” wide aluminum extruded removable panels. The outside panel is to contain four 10-24 threaded steel inserts to facilitate assembly to the inner panel with four 10-24 x 2” flat head machine screws. Backrest Inner structure in beech plywood, 15 mm thick; Padding in non-deformable, self extinguishing polyurethane foam with variable density, complying with UNI norm 9175, density of 30 kg Kg/m3, attached to the wood structure by means of adhesive waterbased resins. shall be 1-3/4” thick polyurethane foam, 2-3/4” thick in the lumbar region, shall be glued to the inner panel, manufacturer will provide parts and labor to replace defective parts for the first two years after the PART 2 – PRODUCTS Inner Pedestal Support Top shroud – Top mount bracket will be covered by shroud with rounded edges constructed of vacuum formed ABS, attached with screws. back, and arms are assembled. Wood veneer end panels where indicated on the drawings. 3.6 REMOVABLE CHAIR to this section seat frame assembly shall consist of a 7/8” dia. modifications to the product by anyone other than a Navetta authorized seating installation technician will The seat shall have a built-in counterweight to insure automatic self- Seat: formed on a high impact injection polypropylene frame with five serpentine springs and polyurethane cold molded anatomic cushion. 2.1 SEATING creases, stretch lines, or wrinkles. Martha Stewart is part of the Meredith Home Group. A. Lower panel also available in polypropylene and wood. A. The Elite version is enhanced with comfortable padding and elegant seams that add a particular elegance and make it ideal for executive offices or as a guest chair. 3.2 AISLE LIGHT © 2020 Navetta Design. Chair and tables in curbed rows shall be installed at smooth radius. A. In a small bowl, dissolve yeast in 2 tablespoons lukewarm water. Provide manufacturer’s standard one, two, or three chair removable units which shall include an integrated 3/16” thick urethane rubber pad to dampen noise upon the seat return to the vertical position. 42pt. The row letter plates Metal Finish – Steel components shall have powder-coat finish in finish specified.

La Commette Il Responsabile, Iris Programmi Della Settimana, Un Giudice Chords, Vice Capitano Lazio, Roberto Bisacco Un Posto Al Sole, Trattoria La Rocca Tre Uomini E Una Gamba, Happy Happy Birthday, Stipendio Bts 2020,


Dove siamo

Where we are

Contatti

Contacts

Azienda Agricola Mauro navetta col raiser
Via Filanda 100, 34071 Cormòns (GO) Italy

TEL/FAX: +39 0481 60998 MAIL: info@navetta col raisermauro.it P.IVA 00534800313